Hunting: How To Use A Tree Stand. How To Skin A Deer

Most deer hunters are now hunting from tree stands. If you are new to deer hunting, or if you have been hunting for a while but have yet to use this method, you should consider using a tree stand. The benefits of using a tree stand are that you will stay out of the deer's range of view, you will keep your scent hidden from the deer, and you will increase the range of your view. You do need to take certain precautions, however, to make sure that you protect yourself.  
 
There are many types of stands and most are safe to use. Some of these include ladder-type stands, climbing stands, and lock-on stands. You can also nail boards to a tree. No matter what type of stand you are using, know that accidents can happen. If a stand seems unsafe to you, do not use it. If you are thinking about using a new tree stand and you are far from your home or from people in general, wait. You would be unable to notify anyone in the event that you were injured. Do not take using a tree stand lightly.
 
You will benefit by becoming familiar with some of the ways by which hunters injure themselves on or around tree stands. Accidents happen when hunters fall asleep. It happens more often that you would imagine. Hunters also get injured when they slip while climbing in or out of a tree stand. You cannot avoid things like excess moisture on your boot, or an exceptionally damp step. The third way by which hunters suffer injury using tree stands is having a piece of equipment break. Nothing is 100% dependable. The best way to avoid severe injury from these unfortunate events is to wear a safety harness.
 
Many hunters know the risk of not using a safety harness, but they still use tree stands without one. Your safety harness will only help you if you wear it. It is not good enough to put on the harness after you have settled into your stand. Climbing into or out of your stand is when you are most likely to be hurt, so you need to be wearing it before you begin ascending your tree stand. It only takes a minute to secure and is well worth the hassle. The damage done by a fall with a safety harness is minimal compared to one without. The safety harness will mean the difference between a few bruises and a premature death.
 
There are a few additional steps you need to consider while preparing to use a tree stand for the first time. Tree steps and tie-on ladders are two favorite methods used by hunters. Some also use large nails as steps. If you are looking to cut costs, go with the nails. They are cheaper than the ladders. Test the nail to make sure that it is strong, steady, and secure. Use nails that will fully support your weight. When nails bend, hunters slip and injure themselves. Use a drill to make pilot holes for the nails. Some hunters prefer to use climbing stands instead of nails, but they are more expensive and limit you to certain trees.
 
Consider using a tree stand as you hunt. It is an effective way to catch your prey off-guard. Both your body and your scent are above the deer's vicinity. It also allows for a broader view as you study the landscape. Tree stands do cause accidents, though. Take all of the necessary steps to prevent any major injuries. Use a safety harness to shorten the distance of your fall. Make sure that the nails you use to climb the tree are secure. Following these steps for using a tree stand ensures a safe and pleasurable hunting experience.  

How to Skin a Deer

While it may not be the most exciting job in the world, skinning a deer is important when returning from a hunt or when still actually on the hunt. If you have taken down the deer, elk, antelope or goat of your dreams in a glorious hunting adventure, you will need to know how to skin the deer and how to get the most out of your kill. If you are just learning about hunting, this information will also be incredible handy for that remarkable day on which you will finally be able to skin a deer.

Essentially, the act of skinning a deer is thought of to be quite simple. The basic fundamental guideline behind it is to follow the built-in guidelines of the body of the deer and work from that standpoint. The skin and muscle tissues of the deer are naturally separate from one another because of the protective membranes, making the process of skinning a lot more like following a built-in blueprint than like trying to lift a rug in the dark. The skin should easily peel from the meat because of these membranes, creating little risk of tearing the skin or tearing the meat.

The most important aspect in skinning a deer is the use of your hands and the pull of your own body weight. With these two integral tools, the aspect of skinning a deer becomes incredibly simple. In fact, skinning a deer can typically be completed in about ten to fifteen minutes without any serious complications.

You should first hang the deer. This makes it easier for you to use your body weight in the skinning process and creates a greater leverage point for skinning the deer. This also ensures that the meat will stay clean. Whether you hang the deer from the neck or from the legs, there is no particular difference. It is important to try to skin the deer within an hour or two of the deer's death, making the skinning process a whole lot easier.

Your knife should be especially sharp. Supposing the deer is hung by the legs, find the large tendon connecting the lower leg segment to the rest of the deer's leg. You should poke a whole with your knife in between the tendon and the bone there, then use your fingers to feel the lump that is created by the deer's double-jointed bone. Once you have found that lump, sever the lower leg at the lower end of the two parts of the double joint. Cut the skin and the tendons here and then snap the deer's leg over your own leg, using your body's leverage to break it.

After you have broken the deer's legs in this fashion, make several incisions around and near the tendon areas. There should be a whole between the tendon and the bone of the lower leg, as well as several incisions near the front legs. You will then sever and snap the front legs as well, making the skinning process easier. After you have made the initial incisions, you will begin the process of undressing the deer of its skin. Use your finger tips and thumbs to get inside the skin near the lower leg incisions and begin to pull the skin off.

Essentially, the pulling of the deer's skin should work a lot like pulling a tight jacket or pair of blue jeans off. It may be a little bit awkward, but the layer of meat revealed below the skin should be a more than ample reward. After the skin is pulled off, you will notice the meat is ready to go and the separation of the meat thanks to the deer's membrane has made the whole process a lot simpler than you ever thought possible.

Skinning a deer, while not particularly romantic, is a process that should take around ten to fifteen minutes and relies almost entirely on your own body weight and strength to pull the skin off of the deer's body. It really is that simple.

Word count 1315

Outdoors & Nature Books--
http://www.hostcontent.net/bo-290060-Outdoors_Nature.html
.:.
Hunting & Fishing Books--
http://www.hostcontent.net/bo-16479-Hunting_Fishing.html
.:.
Hunting Books--
http://www.hostcontent.net/bo-16528-Hunting.html
.:.
Sporting Goods hunting--
http://www.hostcontent.net/sp-3375301-hunting-sr-1-SportingGoods.html
.:.
Hunting Equipment---
http://www.hostcontent.net/sp-4200521-Other_Hunting_Equipment.html
.:.
Hunting & Shooting Accessories---
http://www.hostcontent.net/sp-3413431-Hunting_Shooting_Accessories.html

Article Source: http://www.hostcontent.net

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5

Not yet Rated